In stock · Ready to ship Peplink Direct Wire DC Power Cable, 10 ft, 4-Pin Molex to Bare Leads
Accessories

Peplink Direct Wire DC Power Cable, 10 ft, 4-Pin Molex to Bare Leads

$19.00per unit

Direct wire DC power cable for Peplink routers, 10 ft, 4-pin Molex plug with retention clip to bare leads, for hardwiring MAX BR1, MAX BR2, MAX Transit, and UBR routers to a 12 VDC vehicle supply.

SKU: ACW-634
Quantity
Overview

A permanent vehicle install wires the Peplink router to the fuse panel rather than an accessory socket, and the router's DC input is a 4-pin Molex Micro-Fit connector. This cable carries that plug with a retention clip on one end and 10 ft of cable to bare leads on the other, for a 12 VDC supply. There is no inline fuse, so the circuit needs its own; 2.5 A is the common sizing.

Compatible with the MAX BR1 Classic HW3; MAX BR1 Mini HW3 and BR1 Mini 5G; MAX BR1 Pro and BR1 Pro 5G; MAX BR2 Pro and BR2 Rugged; MAX Transit Mini, Transit Core, Transit Pro, and Transit Pro E; and the UBR.

Specifications
Power Input
12 VDC, bare leads to vehicle supply
Weight
0.15 kg
Compatibility
Peplink MAX BR1 Classic (HW3) Peplink MAX BR1 Mini (HW3), BR1 Mini 5G Peplink MAX BR1 Pro, BR1 Pro 5G Peplink MAX BR2 Pro, BR2 Rugged Peplink MAX Transit Mini, Core, Pro, Pro E Peplink UBR
Other
4-pin Molex with retention clip; 10 ft; no inline fuse
Brand
Peplink
Similar products

More from this category