Multi-Orbit Routers
Satellite as the primary path, cellular as the second, and both combined into one connection. Multi-orbit routers have dedicated satellite ports that power and manage Starlink, OneWeb, and other terminals directly, bond those paths with cellular into a single link, and move traffic between them when one degrades.
Paygasus carries Peplink multi-orbit routers, and more.
Units range from a compact two-port model with Wi-Fi 6 and GPS to an eight-port unit that aggregates several terminals into a multi-gigabit connection.
Browse the products below or request a quote that pairs the router with the satellite terminals and cellular path the site will run.
- ✔ Satellite-ready units from the authorized source, with the manufacturer warranty
- ✔ Satellite terminals and cellular path quoted as one link
- ✔ Talk to a specialist before buying
- ✔ Shop all routers
What a Satellite Port Does
- ✔ Powers the terminal. The port supplies Power over Ethernet to the satellite terminal, with no separate power supply at the dish.
- ✔ Reads its status. The router pulls terminal status, signal, and obstruction data into the cloud console alongside its own.
- ✔ Treats it as a WAN. Each terminal is a path the router can fail over to, balance load across, or bond with the others.
Bonding Satellite With Cellular
A single satellite terminal has a throughput ceiling and weather exposure. Bonding runs the satellite path and a cellular path at the same time and spreads traffic across both, for more throughput than either path alone and a second path in place when one degrades. With several terminals on an eight-port unit, multiple satellite paths bond into a multi-gigabit connection at sites with no fiber for miles.
Two, Four, or Eight Ports
- ✔ Two ports for one terminal plus a backup, with Wi-Fi 6 and GPS in a compact unit for a cabin, cabinet, or vehicle.
- ✔ Four ports in a rugged housing with 2.5G PoE ports, for a plant or yard running satellite plus cellular with wired devices behind the router.
- ✔ Eight ports with 2.5G and PoE+, for aggregating several terminals into one high-capacity link at a venue, camp, or large remote site.
Frequently Asked Questions
Does the router work with Starlink?
Yes. Starlink terminals connect directly to the satellite ports, draw power from them, and appear in the console as managed WAN paths. OneWeb and other terminals connect the same way.
Why not plug the terminal into an ordinary router?
An ordinary WAN port carries the traffic but does not power the terminal, read its status, or bond it with another path. The satellite port does all three.
Can satellite and cellular run at the same time?
Yes. Bonding uses both at once, and failover holds one in reserve. The console sets which mode applies.
How many terminals can one site aggregate?
Up to the unit's port count of two, four, or eight, with each terminal a separate satellite path bonded into one connection.
Where does the satellite hardware itself come from?
Starlink kits, mounts, and power are in the Starlink category and quoted with the router.