5G Adapters

5G for a network built around a wired line. 5G adapters connect to the existing router over a standard Ethernet port, draw power over the same cable, and add a 5G path the router treats as another connection.

Paygasus carries Ericsson Cradlepoint and Peplink 5G adapters, and more.

The 5G path serves as failover behind fiber or as the primary line at a site with none. Indoor units sit in the closet or cabinet; outdoor-rated units mount on a wall or pole where the signal is stronger, with the radio outside and only an Ethernet run entering the building.

Browse the products below or request a quote that confirms the adapter fits the router and the placement at the site.

1 Item

How an Adapter Hands 5G to the Router

  • ✔ Ethernet in, 5G out. The adapter connects to a spare WAN port on the existing router, which sees the cellular connection as one more path.
  • ✔ Address passthrough. The carrier address passes straight through to the router, applying the router's own failover and firewall rules to the cellular path.
  • ✔ Powered over the cable. PoE from an injector or switch port, letting the adapter mount where the signal is rather than where the outlet is.
  • ✔ Cloud-managed. Signal, data usage, firmware, and reboots are handled from the manufacturer's console, the same as the router.

Indoor or Outdoor Placement

  • ✔ Indoor units for a closet, cabinet, or desk where the building does not block the signal badly.
  • ✔ Outdoor-rated units for a wall, pole, or parapet, with a sealed housing and wider temperature range, where moving the radio outside is what makes 5G usable.
  • ✔ Indoor-outdoor units rated for either location, for sites that may move the radio later.

What the Adapter Does Not Replace

An adapter adds a path. It does not route, firewall, or serve Wi-Fi; the router already on site handles those jobs. Where there is no router yet, or the site needs two carriers at once, a cellular router is the better fit.

Frequently Asked Questions

Will a 5G adapter work with the router already installed?

Yes, with routers that have a spare Ethernet WAN port and can treat the adapter as a connection. The product page lists the hand-off and power options.

What speed will the site see?

The carrier signal at the mount point sets the speed, not the adapter. Outdoor placement often raises throughput more than any other change.

Does the adapter need its own power supply?

No, when powered over Ethernet from an injector or PoE switch port. Some units also take DC input.

Can the adapter fail over on its own?

The router handles failover; the adapter supplies the path. With passthrough, the router treats the 5G line like any other WAN.

Which carriers does it accept?

Most units accept a SIM from any of the three major carriers, and some are tied to one network. Carrier certifications are listed per unit.

Talk to a specialist