Starlink

Satellite connectivity that reaches the sites fiber and cellular do not. Starlink hardware covers three deployments: the Performance Gen 3 kit for harsh environments and vehicles in motion, the Standard 4 kit for a fixed site with the Wi-Fi 6 router in the box, and the Mini kit that a field crew carries in and powers from 12 to 48 volts DC. Every kit is backed by the mounts, cabling, rack power and spares that turn a dish into a permanent installation. Transit yards, remote plants, rural charging corridors, mobile command units and county facilities beyond the last fiber drop run on them.

Browse the kits and parts below, or request a quote that matches the kit, the mount and the power to the site.

Items 13-24 of 44

Performance Gen 3, Standard 4 and Mini

Kit Built For What Sets It Apart
Starlink Performance Gen 3 Harsh environments, extreme weather, and vehicles or vessels in motion. Flat phased-array antenna, AC and DC power, 400+ Mbps class throughput. The Gen 3 Router is added separately for Wi-Fi.
Starlink Standard 4 A fixed site that needs year-round service and building Wi-Fi. Wi-Fi 6 Gen 3 Router included, IP67 sealing, snow melt.
Starlink Mini Field crews, temporary sites and vehicles that need a link in minutes. Backpack size, built-in Wi-Fi, IP67 sealing, 12 to 48 volt DC power.

Primary Path, Backup Path or Paired With Cellular

  • ✔ Primary path where there is no fiber. A rural plant, a yard at the edge of the county or a charging site on a highway corridor runs on Starlink as its only connection.
  • ✔ Backup behind fiber or cellular. A dish on the roof gives a staffed building a path that does not share a trench or a tower with the primary.
  • ✔ Paired with a cellular router. A router that carries Starlink and cellular together moves traffic between them when one fails, and can combine both for capacity. Explore Multi-Orbit Routers.
  • ✔ Mobile command and fleets. Performance Gen 3 on a vehicle mount keeps a command unit or a service vehicle connected while moving; Mini rides along for the crew on foot.

Power, Mounting and Cabling for a Permanent Install

  • ✔ Rack power. The Starlink Advanced Power Supply mounts in a rack, takes AC or DC, supports battery backup, and adds a PoE output and a LAN port for the equipment beside it.
  • ✔ Vehicle power. The Standard DC-DC supply runs the dish from vehicle or battery power with no inverter; the Mini runs from a 12 to 24 volt outlet or a 100 watt USB-C source.
  • ✔ Mounts by surface. Pipe adapters for poles, wall mounts for exteriors, pivot mounts for shingled roofs, a ballast-weighted Ridgeline kit for roofs that cannot be drilled, an X-Frame base for ground setup, and wedge, flat, mobility and roof-rack mounts for vehicles.
  • ✔ Cable runs. Antenna cable in 5, 25 and 50 meter lengths for Performance, 15 and 45 meter for Standard, and 15 and 30 meter DC cable for Mini, with routing kits for standard and masonry walls.
  • ✔ Spares. Replacement power supplies, kickstands, sealing plugs, Ethernet and AC cables, and carry cases, so a field team is not waiting on a part.

What to Settle Before Ordering

  • ✔ Fixed or in motion. Performance Gen 3 for anything that moves; Standard 4 for a building; Mini for a crew.
  • ✔ Power at the site. AC in a closet, DC in a vehicle, battery backup in a rack. The power supply is chosen with the kit.
  • ✔ Mounting surface. Pole, wall, roof, ground or vehicle decides the mount and whether drilling is allowed.
  • ✔ Cable run. Measure from dish to equipment and order the length above it.
  • ✔ Wi-Fi. Serve it from the Starlink router, or hand the dish to the enterprise router and switch already on site.
  • ✔ Service plan. Plans are tied to the kit and the use. A specialist walks through the options before the hardware ships.

Frequently Asked Questions

Which Starlink kit fits a fixed site, a vehicle or a field crew?

Standard 4 for a fixed site, with the Wi-Fi 6 router included. Performance Gen 3 for vehicles, vessels and harsh environments, with AC and DC power. Mini for a crew that carries the kit in and runs it from DC.

Can Starlink be the primary connection?

Yes. Sites without fiber commonly run on Starlink alone. Where a second path is required, a cellular router carries Starlink and cellular together and moves traffic between them.

How does Starlink connect to the equipment already on site?

Over Ethernet. The Standard 4 and Performance Gen 3 kits hand off to a third-party router or switch, and the Mini wires in over its Ethernet cable. The Starlink router is optional once an enterprise router is in place.

What power does each kit need?

Standard 4 and Performance Gen 3 take AC or DC through their power supplies, with the Advanced Power Supply adding rack mounting and battery backup. Mini runs from 12 to 48 volts DC, a vehicle outlet or a 100 watt USB-C source.

Can the dish mount without drilling?

Yes. The Ridgeline Mount Kit holds the Standard antenna on a roof with ballast weight, and the X-Frame base sets it on the ground for quick setup.

Does Starlink work in snow and extreme weather?

The Standard 4 carries snow melt and IP67 sealing. Performance Gen 3 is built for extreme weather and in-motion use. Operating ranges are listed on each product page.

Where is the service plan set up?

On the Starlink account tied to the kit. A specialist walks through the plan options for the site before the hardware ships.

Talk to a specialist